ZYS radial thrust ball bearing double row angular contact bearing 3315 for auto parts
Double row angular contact ball bearings can withstand large radial and axial bidirectional combined loads and moment loads (mainly radial loads), which can limit the axial displacement of the shaft or shell, with a contact angle of 30°. Double row angular contact ball bearings mainly use steel stamping cage.
Application: compared with single row bearing, double row angular contact ball bearing has better rigidity and can bear overturning moment. The bearing is non separating type. It is especially suitable for applications with high rigidity requirements. It is widely used in the front wheel hub of cars (some models also use double row tapered roller bearings of the same size).
Features: the tilting between the inner and outer rings of double row angular contact ball bearings is limited. The allowable tilting angle depends on the internal clearance, bearing size, internal design and the force and moment acting on the bearing, and the maximum allowable tilting angle shall ensure that there is no excessive additional stress in the bearing.
If there is an inclination angle between the inner and outer rings of the bearing, the service life of the bearing will be affected, and the running accuracy of the bearing will be reduced and the running noise will be increased. Generally, double row angular contact ball bearing adopts nylon cage or brass solid cage. During the installation of double row angular contact ball bearing, it should be noted that although the bearing can bear two-way axial load, if there is a ball mounting gap on one side, it should be noted that the main axial load should not pass through the groove edge of the notched side. When using the bearing, pay attention to make the side raceway without the ball loading notch bear the main load.
The double row angular contact ball bearing can bear large combined radial and axial loads and moment loads, which are mainly radial loads. It can limit the axial displacement of the shaft or shell in both directions, and the contact angle is 30 degrees.
Model list of double row angular contact ball bearings:
Dimension |
load Rating |
LimitingSpeed |
Number |
Weight
(Kg) |
| d |
D |
B |
(KN)
Cr |
(KN)
Cor |
Grease |
Oil |
| 10 |
30 |
14.3 |
8.4 |
6.5 |
14000 |
19000 |
3200 |
0.05l |
| 12 |
32 |
15.9 |
8.45 |
607 |
13000 |
17000 |
3201 |
0.060 |
| 15 |
35 |
15.9 |
11.1 |
9.05 |
11000 |
15000 |
3202 |
0.069 |
| 42 |
19 |
14.2 |
11.8 |
9900 |
13000 |
3302 |
0.127 |
| 17 |
40 |
17.5 |
14.2 |
11.8 |
9900 |
13000 |
3203 |
0.099 |
| 47 |
22.2 |
17.5 |
15 |
9000 |
12000 |
3303 |
0.185 |
| 20 |
47 |
20.6 |
17.5 |
15.2 |
8800 |
12000 |
3204 |
0.166 |
| 52 |
22.2 |
21.1 |
18.6 |
8000 |
11000 |
3304 |
0.221 |
| 25 |
52 |
20.6 |
19.3 |
18.4 |
7300 |
9800 |
3205 |
0.183 |
| 62 |
25.4 |
29.4 |
26.8 |
6700 |
8900 |
3305 |
0.354 |
| 30 |
62 |
23.8 |
27.7 |
27.4 |
6300 |
8400 |
3206 |
0.303 |
| 72 |
30.2 |
39 |
36.5 |
5700 |
7600 |
3306 |
0.558 |
| 35 |
72 |
27 |
37.5 |
38 |
5500 |
7400 |
3207 |
0.458 |
| 80 |
34.9 |
49.5 |
47.5 |
5000 |
6600 |
3307 |
0.756 |
| 40 |
80 |
30.2 |
40.5 |
45 |
4900 |
6600 |
3208 |
0.627 |
| 90 |
36.5 |
54.5 |
57.5 |
4400 |
5900 |
3308 |
1.030 |
| 45 |
85 |
30.2 |
46.5 |
52 |
4400 |
5900 |
3209 |
0.678 |
| 100 |
39.7 |
67.5 |
72.5 |
4000 |
5300 |
3309 |
1.370 |
| 50 |
90 |
30.2 |
52.5 |
60 |
4000 |
5300 |
3210 |
0.698 |
| 110 |
44.4 |
81.5 |
89.5 |
3600 |
4800 |
3310 |
1.980 |
| 55 |
100 |
33.3 |
66 |
76.5 |
3600 |
4900 |
3211 |
1.070 |
| 120 |
49.2 |
96.5 |
108 |
3300 |
4400 |
3311 |
2.420 |
| 60 |
110 |
36.5 |
70.5 |
88 |
3400 |
4500 |
3212 |
1.340 |
| 130 |
54 |
113 |
128 |
3000 |
4000 |
3312 |
3.070 |
| 65 |
120 |
38.1 |
78 |
99 |
3100 |
4200 |
3213 |
1.680 |
| 140 |
58.7 |
131 |
150 |
2800 |
3700 |
3313 |
3.900 |
| 70 |
125 |
39.7 |
86 |
110 |
2900 |
3900 |
3214 |
1.840 |
| 150 |
63.5 |
153 |
168 |
2600 |
3500 |
3314 |
5.200 |
| 75 |
130 |
41.3 |
94 |
122 |
2700 |
3600 |
3215 |
2.000 |
| 160 |
68.3 |
172 |
191 |
2400 |
3200 |
3315 |
6.300 |
About ZYS
Luoyang Bearing Research Institute Co., Ltd. is a high-tech enterprise specializing in the development of "High-end, precise, advanced, unique, Non-standard" bearing products for the key units in various fields of national economic construction. Its predecessor, Luoyang Bearing Research Institute, was established in 1958. It is the only state-level comprehensive research institute in China's bearing industry. In 1999, it entered China National Machinery Industry Group Co., Ltd. and transformed into a science and technology enterprise.
ZYS Precision Bearing Quality Control and Assurance:
Austrian AICHELIN heat treatment equipment and long-life heat treatment process provide a strong guarantee for the continuous and reliable operation of bearings.
ZYS MANUFACTURING CAPACITY
ZYS Quality assurance
ZYS bearing products
ZYS Packing :
FAQ:
Q: Are you
trading company or manufacturer?
A: ZYS is bearing manufacturer, the only first-class comprehensive research institute in China bearing industry.
Q: How do you
control quality of bearing?
A: ZYS has established quality control systems for each kind of bearing and spindle. All products and services passed ISO9001-2008 Quality Certificate.
Q: What is the
MOQ?
A: It depends on the bearing type. You can send inquiry or send e-mail for more information.
Q: How about the
package?
A: Industrial packing in general condition (Plastic tube+ carton+ pallet). Accept design package when OEM.
Q: How long is the
delivery time?
A: It will take about 10 to 40 days, depends on the model and quantity.
Q: How about the
shipping?
A: We can arrange the shipment or you may have the forwarder.
Q: Is
sample avaiable?
A: Yes, sample order is acceptable.
Q: Can we use our own LOGO or design on bearings?
A: Yes.
OEM is acceptable. We can design the bearing with your requirements and use your own LOGO and package design.
Audited Supplier 
){kind=link}